(888) 509-9778

Aladdin LED Installation Instructions

Optional

LIRT22-DM-XXX, LIRT24-DH-XXX

MIN. LAMP COMPARTMENT is shown below:

Model Length (mm) Wide (mm) High (mm)
LIRT22-DM-XXX 565 565 78
LIRT24-DH-XXX 1165 565 78

Note

Please read this entire manual to fully understand and safely use this product. Specifications are subject to change without notice. Please visit our website the most recent user guide versions.

Unpacking

  1. Unpack and carefully examine the product.
  2. Report any damage and save all packing materials if any part(s) were damaged during shipping.
  3. Do not attempt to use this apparatus if it is damaged.

Watch our video to see how quickly and easily the Lumeneering Retrofit is installed.

IMPORTANT SAFETY INFORMATION

WARNINGS!

  1. Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
  2. Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.
  3. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
  4. To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
  5. THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION.
  6. Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation. Do not leave any other open holes in an enclosure of wiring or electrical components.

Read All Instructions Before Installation

  1. Consult a qualified electrician to ensure correct branch circuit conductor.
  2. The product should be installed and operated by a qualified electrician or technician in accordance with relevant local codes.
  3. Risk of electric shock. Ensure that main power source is off when wiring or soldering the of the product.
  4. Before installing this fixture or doing any maintenance, make sure to turn off the power the circuit breaker or fuse box.
  5. Check to make sure that all fixture connections have been properly made and the fixture grounded to avoid potential electrical shocks.
  6. Do not handle energized fixture when hands are wet, when standing on wet or damp surfaces, or in water.
  7. This pane lights are normally set to work at extra low voltage below DC42V and constant current conditions to ensure safety to human body.
  8. Designed for use in 100V~277V, 50-60Hz, protected circuit. Apply class 2 power supply.

Included In This Box

  1. LED Luminaire
  2. Bracket
  3. Installation instruction
  4. Relamping Marking Labels